View TC74HC390AP07_4124734.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TC74HC390AP/AF/AFN
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC74HC390AP,TC74HC390AF,TC74HC390AFN
Dual Decade Counter
The TC74HC390A is a high speed CMOS DUAL DECADE COUNTER fabricated with silicon gate C2MOS technology. It achieves the high speed operation similar to equivalent LSTTL while maintaining the CMOS low power dissipation. It consists of two independent 4-bit counters, each composed of a divide-by-two and a divide-by-five counter. The divide-by-two counter is incremented on the negative going transition of clock A ( CKA ). The divided-by-five counter is incremented on the negative going transition of clock B ( CKB ). The counter can be cascaded to form decade, bi-quinary, or various combinations up to a divide-by-100 counter. When the CLR input is set high, the Q outputs are set to low independent of the clock inputs. All inputs are equipped with protection circuits against static discharge or transient excess voltage.
Note: xxxFN (JEDEC SOP) is not available in Japan. TC74HC390AP
TC74HC390AF
Features
* * * * *
*
High speed: fmax = 84 MHz (typ.) at VCC = 5 V Low power dissipation: ICC = 4 A (max) at Ta = 25C High noise immunity: VNIH = VNIL = 28% VCC (min) Output drive capability: 10 LSTTL loads Symmetrical output impedance: |IOH| = IOL = 4 mA (min) Balanced propagation delays: tpLH - tpHL Wide operating voltage range: VCC (opr) = 2~6 V Pin and function compatible with 74LS390
TC74HC390AFN
* *
Pin Assignment
Weight DIP16-P-300-2.54A SOP16-P-300-1.27A SOL16-P-150-1.27 : 1.00 g (typ.) : 0.18 g (typ.) : 0.13 g (typ.)
1
2007-10-01
TC74HC390AP/AF/AFN
IEC Logic Symbol
Block Diagram
Truth Table
Inputs
CKA CKB
Outputs CLR H L L QA L QB L QC L QD L
X
X X
Binary Count Up Quinary Count Up
X
X: Don't care
2
2007-10-01
TC74HC390AP/AF/AFN
System Diagram (1/2 package)
Timing Chart
(1) BCD count sequence (Note)
Note:
QA connected to CKB
3
2007-10-01
TC74HC390AP/AF/AFN
(2) BI-quinary count sequence (Note)
Note:
QD connected to CKA
Absolute Maximum Ratings (Note 1)
Characteristics Supply voltage range DC input voltage DC output voltage Input diode current Output diode current DC output current DC VCC/ground current Power dissipation Storage temperature Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Tstg Rating -0.5~7 -0.5~VCC + 0.5 -0.5~VCC + 0.5 20 20 25 50 500 (DIP) (Note 2)/180 (SOP) -65~150 Unit V V V mA mA mA mA mW C
Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 2: 500 mW in the range of Ta = -40 to 65C. From Ta = 65 to 85C a derating factor of -10 mW/C shall be applied until 300 mW.
Operating Ranges (Note)
Characteristics Supply voltage Input voltage Output voltage Operating temperature Symbol VCC VIN VOUT Topr Rating 2~6 0~VCC 0~VCC -40~85 0~1000 (VCC = 2.0 V) Input rise and fall time tr, tf 0~500 (VCC = 4.5 V) 0~400 (VCC = 6.0 V) ns Unit V V V C
Note:
The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs must be tied to either VCC or GND.
4
2007-10-01
TC74HC390AP/AF/AFN
Electrical Characteristics
DC Characteristics
Characteristics Symbol Test Condition VCC (V) 2.0 High-level input voltage VIH 4.5 6.0 2.0 Low-level input voltage VIL 4.5 6.0 2.0 IOH = -20 A High-level output voltage VOH VIN = VIH or VIL IOH = -4 mA IOH = -5.2 mA IOL = 20 A Low-level output voltage VOL VIN = VIH or VIL IOL = 4 mA IOL = 5.2 mA Input leakage current Quiescent supply current IIN ICC VIN = VCC or GND VIN = VCC or GND 4.5 6.0 4.5 6.0 2.0 4.5 6.0 4.5 6.0 6.0 6.0 Min 1.50 3.15 4.20 1.9 4.4 5.9 4.18 5.68 Ta = 25C Typ. 2.0 4.5 6.0 4.31 5.80 0.0 0.0 0.0 0.17 0.18 Max 0.50 1.35 1.80 0.1 0.1 0.1 0.26 0.26 0.1 4.0 Ta = -40~85C Min 1.50 3.15 4.20 1.9 4.4 5.9 4.13 5.63 Max 0.50 1.35 1.80 0.1 0.1 0.1 0.33 0.33 1.0 40.0 A A V V V V Unit
Timing Requirements (input: tr = tf = 6 ns)
Characteristics Symbol Test Condition VCC (V) Minimum pulse width ( CK ) Ta = 25C Typ. Limit Ta = -40 ~85C Limit Unit
tW (H) tW (L)
2.0
75 15 13 75 15 13 25 5 5 6 32 38 6 31 36
95 19 16 95 19 16 30 6 5 5 26 31 5 25 29 MHz MHz ns ns ns
4.5 6.0 2.0
Minimum pulse width (CLR)
tW (H)
4.5 6.0 2.0
Minimum removal time
trem
4.5 6.0
Clock frequency ( CKA )
2.0 f
4.5 6.0 2.0
Clock frequency ( CKB )
f
4.5 6.0
5
2007-10-01
TC74HC390AP/AF/AFN
AC Characteristics (CL = 15 pF, VCC = 5 V, Ta = 25C input: tr = tf = 6 ns)
Characteristics Output transition time Propagation delay time ( CKA -QA) Propagation delay time ( CKA -QC) Propagation delay time ( CKB -QB, QD) Propagation delay time ( CKB -QC) Propagation delay time (CLR-Qn) Maximum clock frequency ( CKA ) Maximum clock frequency ( CKB ) Symbol tTLH tTHL tpLH tpHL tpLH tpHL tpLH tpHL tpLH tpHL tpHL Test Condition
Min
Typ. 4
Max 8
Unit ns
10
20
ns
QA connected to CKB
29
51
ns
12
22
ns
17
32
ns
12
26
ns
fmax
35
84
MHz
fmax
33
65
MHz
6
2007-10-01
TC74HC390AP/AF/AFN
AC Characteristics (CL = 50 pF, input: tr = tf = 6 ns)
Characteristics Symbol Test Condition VCC (V) 2.0
Ta = 25C Min

Ta = -40~85C Max 75 15 13 120 24 20 290 58 49 130 26 22 185 37 31 150 30 26

Typ. 30 8 7 39 13 11 102 34 29 45 15 13 63 21 18 45 15 13 20 77 90 15 60 70 5 44
Min

Max 95 19 16 150 30 26 365 73 62 165 33 28 230 46 39 190 38 32

Unit
Output transition time
tTLH tTHL tpLH tpHL
4.5 6.0 2.0
ns
Propagation delay time ( CKA -QA) Propagation delay time ( CKA -QC) Propagation delay time ( CKB -QB, QD) Propagation delay time ( CKB -QC) Propagation delay time (CLR-Qn) Maximum clock frequency ( CKA ) Maximum clock frequency ( CKB ) Input capacitance Power dissipation capacitance
4.5 6.0 2.0
ns
tpLH tpHL
QA connected to CKB
4.5 6.0 2.0
ns
tpLH tpHL
4.5 6.0 2.0
ns
tpLH tpHL
4.5 6.0 2.0
ns
tpHL
4.5 6.0 2.0
ns
6 32 38 6 32 36

5 26 31 5 25 29

fmax
4.5 6.0 2.0
MHz
fmax
4.5 6.0
MHz
CIN CPD (Note)

10
10
pF pF
Note:
CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPDVCCfIN + ICC/2 (per counter)
7
2007-10-01
TC74HC390AP/AF/AFN
Package Dimensions
Weight: 1.00 g (typ.)
8
2007-10-01
TC74HC390AP/AF/AFN
Package Dimensions
Weight: 0.18 g (typ.)
9
2007-10-01
TC74HC390AP/AF/AFN
Package Dimensions (Note)
Note: This package is not available in Japan. Weight: 0.13 g (typ.)
10
2007-10-01
TC74HC390AP/AF/AFN
RESTRICTIONS ON PRODUCT USE
* The information contained herein is subject to change without notice.
20070701-EN GENERAL
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
11
2007-10-01

▲Up To Search▲

Price & Availability of TC74HC390AP07

	To Download TC74HC390AP07 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .